Power : 10HP / 7.5KW. Input Voltage: 230V 60Hz/ 1 phase.Max Working Pressure : 125 psi / 8 bar. Working Operating pressure: 0.7-1.0MPa. Power consumption: 0.585 KW. Refrigerant amount: 0.4 kg. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding. HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep. Every 50 hours or weekly. Check intake filter, if necessary clean it. Drain condensation water from oil tank. Check and adjust belt tension if necessary (belt driven only). Replace lubricants (for mineral lubricants oil). Replace lubricants (for synthetic lubricants oil). Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts. The service life of compressor depends on the environment conditions such as dust, vent etc.