10HP Rotary Screw Air Compressor With Refrigerated Dryer 3PH 230V and 80 Gal

  
(F)NPT Outlet: NPT 1. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding.

HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep. Garage & Industrial & Light Duty. Features a programmable control system. Reduces your air system footprint and allows for easy maintenance. Please read the operate manual carefully before start the compressor working.

Don't dismantle any connector or equipment when machine is. Otherwise, the high-pressure gas and high temperature will.

Please pay more attention to parts such as pump, oil tank and. Pipelines, because they are high temperature when machine is running.

Don't try to change the working pressure rated. Working pressure exceeding the rated range will cause machines to.

Overload and stop to work. Provide proper grounding connection for electric parts according. Use suitable wires matching the.

Working power, otherwise they will burnt out due to high temperature. Or some other dangerous events occur. The compressed air for breathe use is prohibit. Every 50 hours or weekly.

Check intake filter, if necessary clean it. Drain condensation water from oil tank.

Check and adjust belt tension if necessary (belt driven only). Replace lubricants (for mineral lubricants oil). Replace lubricants (for synthetic lubricants oil). Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original.

The service life of compressor depends on the environment conditions such as dust, vent.