230V 30 Hp 22KW Rotary Screw Air Compressor 125-113cfm 3-Phase NPT 1 Stationary

  

230V 30 Hp Rotary Screw Air Compressor 113 CFM 125 PSI for Laser Cutting 3-Phase. Voltage : Input Voltage (V / Hz) : 230V /60Hz. Output Pipe Diameter : NPT 1. Max Working Pressure : 100-125 psi / 8 bar. Dimension L-W-H: 40-25-32(inch)/ 100-64-81(cm).

Packing Weight: 600lbs / 272kg. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding. HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep. Garage & Industrial & Light Duty.

Features a programmable control system. Reduces your air system footprint and allows for easy maintenance. Every 50 hours or weekly --- Check oil level. -- Check intake filter, if necessary clean it.

-- Drain condensation water from oil tank. Every 500 hours --- Check and adjust belt tension if necessary (belt driven only).

Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt.

Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts. The service life of compressor depends on the environment conditions such as dust, vent etc.