460V 3PH Rotary Screw Air Compressor with dryer& 80Gal tank 20HP/15KW 81CFM 125PSI

  
Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep Garage & Industrial & Light Duty Features a programmable control system Reduces your air system footprint and allows for easy maintenance. Due to the constant temperature and low temperature operation, the non-wearing tooth profile and bearings have a service life of 80,000 hours. High efficiency and energy saving, low speed during operation, large air volume, high air pressure and low noise. For the high temperature environment in summer, a large-area plate heat exchanger is used. Please read the operate manual carefully before start the compressor working. Don't dismantle any connector or equipment when machine is running. Otherwise, the high-pressure gas and high temperature will hurt you seriously. Please pay more attention to parts such as pump, oil tank and pipelines, because they are high temperature when machine is running. Don't try to change the working pressure rated.

Because change working pressure exceeding the rated range will cause machines to overload and stop to work. Provide proper grounding connection for electric parts according to electric security regulations.

Use suitable wires matching the working power, otherwise they will burnt out due to high temperature or some other dangerous events occur. The compressed air for breathe use is prohibit. Every 50 hours or weekly --- Check oil level. -- Check intake filter, if necessary clean it. -- Drain condensation water from oil tank.

Every 500 hours --- Check and adjust belt tension if necessary (belt driven only) Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. -- Replace intake filter Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt. Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.

The service life of compressor depends on the environment conditions such as dust, vent etc.