50HP 3Ph Rotary Screw Air Compressor 460V 125psi@219cfm Programmable Industrial

  

Voltage : Input Voltage (V / Hz) : 460V / 60Hz. Output Pipe Diameter : NPT 1 1/2. Max Working Pressure : 125 psi / 8 bar. Rotary Screw Compressor must work by the air tank, the machine need work by 270 gal. Air Cooling Belt Driven / Direct Driven Stationary Screw Air Compressor, Built-in Air Oil Separator.

Motor RPM : 3600;All the compressors we produced are qualified for CE certificated. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding. HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep.

Features a programmable control system. Reduces your air system footprint and allows for easy maintenance. We are more than a factory but a trustworthy air compressor solution provider.

Please read the operate manual carefully before start the compressor working. Don't dismantle any connector or equipment when machine is running. Otherwise, the high-pressure gas and high temperature will hurt you seriously. Please pay more attention to parts such as pump, oil tank and pipelines, because they are high temperature when machine is running. Don't try to change the working pressure rated.

Because change working pressure exceeding the rated range will cause machines to overload and stop to work. Provide proper grounding connection for electric parts according to electric security regulations. Use suitable wires matching the working power, otherwise they will burnt out due to high temperature.

Or some other dangerous events occur. The compressed air for breathe use is prohibit. Every 50 hours or weekly. Check intake filter, if necessary clean it.

Drain condensation water from oil tank. Check and adjust belt tension if necessary (belt driven only). Replace lubricants (for mineral lubricants oil). Replace lubricants (for synthetic lubricants oil).

Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts. The service life of compressor depends on the environment conditions such as dust, vent etc. We will not offer free of charge service to repair damaged machine due to installation error, using.

For routine maintenance note that HPDMC technical service team are able to provide you with assistance and spare parts.