Rotary Screw Air Compressor with Dryer 10HP 3 Phase 230V + 60-Gal ASME Tank

  

Rotary Screw Air Compressor with Dryer 10HP 3 Phase 230/460 V with 60-Gallon ASME Tank. Power : 10HP / 7.5KW; Input Voltage: 230V 60Hz/ 3 phase; Air Flow : 39cfm; Max Working Pressure : 100-125 psi / 8 bar; Motor : 6300rpm Output Pipe Diameter: NPT3/4" Package: 773661" Weight: 900lbs Tank: ASME 60 gal. Working Operating pressure: 0.7-1.0MPa. Power consumption: 0.585 KW.

Refrigerant amount: 0.4 kg. Air Brushing, Blow Cleaning, Bolting/Wrenching, Brad Nailing/Stapling, Cutting, Drilling, Finish Nailing, Framing Nailing, Grinding, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Sanding, Spraying, Surface Prep Garage & Industrial. Every 50 hours or weekly --- Check oil level. -- Check intake filter, if necessary clean it. -- Drain condensation water from oil tank.

Every 500 hours --- Check and adjust belt tension if necessary (belt driven only) Every 2000 hours --- Replace lubricants (for mineral lubricants oil) --- Replace oil filter. -- Replace intake filter Every 4000 hours --- Replace lubricants (for synthetic lubricants oil) --- Replace oil separator --- Clean cooler for dirt. Replace filter element and lubricant after first 500 hours of operation. Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts. The service life of compressor depends on the environment conditions such as dust, vent etc.